Replacing a Lintel of a Commercial Building - What’s the Difference?

Over time, load-bearing supports, or lintels, as they are called, develop cracks and crevices, and expand. When that happens, the lintels need to be replaced. Various types of support props are used by the professionals to do so. They hold the weight above the lintel, while it is being replaced.

Now discussing lintel replacement in Perth, there are two sides of the coin. While one is for commercial buildings, the other is for the domestic ones.

The steps in the two cases are more or less similar. The only difference between the two is that in the case of commercial buildings, the steps are taken on a much larger scale.

Cutting the Mortar

This is the first step of commercial lintel replacement in Perth. At first, they take on the mortar. They cut into it, between the bricks that are there above the said lintel. Once adequate cuts are made, the props with the required masonry supports are inserted.

Since commercial buildings have to bear much higher loads, the props need to be adequate and should be able to take on greater weight.

Inserting props and the masonry supports

In the next phase, the props are placed on the ground, and they are extended to the appropriate height. Next, they are secured by placing a pin through the collar.

Now the back of the mason should be hammered back, till it is almost two-third of its way into the brickwork.

Removing the Bricks

Removing the bricks around the lintel along with the excess mortar, involves the next step.

Removal and Replacement of the Lintel

Now, finally, the lintel is removed and replaced.

Replacing the bricks

Now it is time to renew and then refill the blocks around the new lintel, making sure to proceed further than the lintel towards the edges, to confirm security.

Giving 24 Hours time

Now, the entire set for 24 hours is left to dry and then remove the supports and props and other masonry attachments, and then slits made to insert the supports are also repaired.

So, these are more or less the steps to repair and replace the lintel. The process is more or less the same in case of a commercial building.

The only difference is that, since the dimension and size of the commercial buildings are bigger, the safety measures taken for lintel replacement in Morley are sterner. However, the bottom line is giving extra support to the buildings’ doors and windows so that they last long.